My Chrysler Won’t Start: 20 Causes & Fixes!

Ask Chrysler Mechanic

Table of Contents


If your Chrysler refuses to start and you have to reach a destination urgently, it can be frustrating and tense. Although some causes for a car not starting can be easily identified and resolved, others require professional mechanic intervention. In this article, we are going to tackle some common reasons why your Chrysler won't start and offer tips for diagnosing and fixing the issues on your own. Let's get your Chrysler up and running again!

Chat with a Chrysler Mechanic

Before we delve into the details, if you want to skip ahead and just get the answer, you're welcome to engage in a one-on-one chat and ask a Chrysler mechanic regarding the reasons your Chrysler doesn't start and methods to resolve it. Located at the bottom-right section of this site, there is a real-time chat function that connects you with skilled mechanics accessible round-the-clock to address queries and provide guidance. So if you need quick, affordable assistance for your vehicle, it's a fantastic selection where you're able to pose as many queries to mechanics as you want. With that said, let's proceed!

1: Dead Battery

Dead battery

One typical cause your automobile refuses to start is a drained battery. Symptoms that your battery could be depleted include an engine that won't turn over and/or a clicking sound when turning the ignition key. In order to remedy this problem, jump-starting your Chrysler, or replacing the dead battery may be necessary – keep jump-start cables handy in case you need them!

2: Neglected Alternator

Car alternator causing battery to drain

The alternator is responsible for recharging the battery in your automobile as it runs. If it malfunctions, there could be a lack of sufficient power to start your automobile started. Symptoms that there might be an issue consist of an illuminated battery indicator on your Chrysler's dashboard, faint headlights, or even a total lack of power. Fixing this issue adequately requires professional diagnosis and mending. The cost of this for diagnosis and repair depends on the mechanic and the required parts. Should you require guidance on this, you can have a chat with a skilled mechanic via the Internet whenever you want.

3: Clogged Fuel Filter

Clogged Fuel filter

The fuel filter plays an essential role in clearing out unwanted particles from gasoline prior to reaching your Chrysler's engine, so if it's obstructed, it could lower performance or hinder your car from starting completely. Signs that your filter may be blocked include lack of power, engine stalling, or failure to start. Fixing an obstructed fuel filter yourself or with assistance from a proficient mechanic shouldn't take long. You can obtain advice and step-by-step guidance on resolving this problem by having a conversation with a skilled mechanic via the Internet.

4: Malfunctioning Starter Motor

car starter motor faulty

Your Chrysler's starter motor is in charge of cranking up the engine as you turn the key in the ignition. If it malfunctions, it's probable the cause for your vehicle doesn't start or you may hear grinding noises while attempting to start the Chrysler. The remedy for a faulty starter motor is replacement; this requires skilled evaluation and repair. The cost of such a service can vary a lot relying on your specific situation. You can ask an online mechanic for advice on cost estimates for your specific situation, so you can be prepared when you go to your neighborhood mechanic's place.

5: Neglected Ignition Switch

Faulty ignition switch

The ignition switch handles starting and keeping your vehicle's engine running smoothly. Should it malfunction, it can stop your Chrysler from starting or make it stall as you drive. Signs that there's an issue with the ignition switch consist of no action while turning the key in the ignition and no engine turning over. To address this problem, expert mechanic assessment and fixing could be all it takes. Consult a mechanic online or in person for a proper evaluation and settlement.

6: Damaged Spark Plugs

faulty spark plugs car

Spark plugs ignite the fuel inside the cylinders of an engine. When they wear out or get damaged, they might not generate a spark and this can stop the engine from starting. Indications of bad spark plugs consist of a rough idle, reduced acceleration, or difficulty when you try to start your automobile. To fix this issue, swap them out with new ones, either by a proficient mechanic or DIYer. This needn't be an expensive or difficult repair; if you prefer handling it on your own, you can get advice and be walked through the process at any time by speaking to a mechanic via the Internet.

7: Fuel Pump Failure

faulty fuel pump

The fuel pump takes care of delivering fuel to the engine, and should it fail, your Chrysler won't start or run correctly. Signs that there may be a problem involve an absence of reaction while turning the key in the ignition, the engine coming to a stop, or sputtering. The sole solution for a malfunctioning fuel pump is to replace it – this requires professional diagnosis and fixing by experienced mechanics.

8: Faulty Distributor Cap

faulty distributor cap

The distributor cap takes care of transmitting electrical current from the coil to your spark plugs. If this component malfunctions, your engine could fail to achieve proper ignition. A faulty distributor cap can hinder the engine from starting correctly, causing misfiring, slow acceleration, and trouble with starting. The solution for a faulty distributor cap is changing it, which can be achieved by either an experienced mechanic or a do-it-yourselfer with simple skills and equipment to save money. For real-time step-by-step direction on how to complete this process and save money, you can talk to a mechanic online and receive assistance.

9: Ignition Coil Failure

faulty ignition coil car

The ignition coil takes care of creating the electrical current that sets off fuel in an engine's cylinders. If it breaks down, the engine could fail to start or experience misfiring. Indications of a defective coil comprise an absence of reaction as you turn on the ignition, misfiring engine noises, and poor acceleration. To address this problem expert assessment and fixing are typically required; changing the ignition coil usually resolves all these issues. How much this will cost, relies on the repair professional and your unique case. You can obtain a quote or a second opinion on the expense from an online mechanic to help with the course of action.

10: Broken Timing Belt

broken timing belt car

The timing belt takes care of syncing the movement of the valves in an engine and its pistons. If it fails, chances are the cause of your Chrysler won't start, as the engine may not start or run correctly. Symptoms that there may be a problem involve no response when engaging the ignition, misfiring, or stalling the engine. To address this situation, skilled evaluation and fixing are required; swapping the belt entails both. If you would like a quote for your specific situation, you are free to get advice from a virtual mechanic, to be well-prepared while visiting a nearby garage.

11: Failed Camshaft Position Sensor

camshaft position sensor.

Your Chrysler's camshaft position sensor handles observing a camshaft's position and relaying that information to the engine's control module. If it fails, as you try starting your Chrysler, your engine might not start or function as it should. Signs might involve no response when using the ignition key, misfiring noises from the engine, or weak acceleration. An expert assessment and fixing for a faulty camshaft position sensor usually involve changing it out with a replacement. The expense for this depends on your situation, you may obtain an estimate from a nearby garage or a virtual mechanic.

12: Failing Crankshaft Position Sensor.

Car mechanic hands replacing a camshaft position sensor.

A crankshaft position sensor takes care of monitoring the position of your engine's crankshaft (crank) and sending that information to the engine control module. If it malfunctions, your vehicle could fail to crank, start, or run correctly; symptoms involve no response when using the ignition key, engine misfiring noises, or inadequate acceleration. The exclusive remedy for a faulty crankshaft position sensor is replacing it, which necessitates an expert mechanic to diagnose and repair it. You can acquire advice regarding your unique circumstances from a local mechanic or online.

13: Faulty Mass Airflow Sensor

faulty air flow sensor

A mass airflow sensor handles gauging the volume of air going into the engine and conveying that data to Chrysler's engine control module. If it breaks down, it's probable the reason your Chrysler is experiencing starting or running issues. Signs of a failing airflow sensor include poor acceleration, misfiring engine noises, or trouble starting the Chrysler. To resolve this situation, you need an expert mechanic to evaluate and resolve the defective mass airflow sensor. Talk to a nearby garage or one online to get advice and expense approximations that are individual to you.

14: Computer System Malfunction

faulty computer system in car

Contemporary vehicles rely heavily on their engine control unit for many essential functions, like starting and running the engine and controlling emissions and transmission. If this part fails, it might result in different problems like an unresponsive engine, warning lights on the dashboard, sluggish acceleration, or difficulty starting the engine. To address a computer system malfunction, it's best to have it diagnosed and repaired by a skilled automotive expert.

15: Blown Fuses

blown fuse in car

A damaged fuse could also be the cause in terms of your vehicle not starting. Fuses protect numerous electrical parts in your Chrysler, and if a fuse burns out, that component like the starter motor or might not function correctly. Symptoms that a blown fuse includes no response when turning the key in the ignition, no functioning lights or accessories, or an engine misfiring intermittently. To identify a damaged fuse, check the fuse box located either under the hood or below the dashboard. If you discover a burnt-out fuse, change it with one of an identical amperage rating. Although fixing a fuse is typically an uncomplicated DIY repair, take note of the fact that repeatedly blowing fuses might suggest an underlying electrical problem that requires expert diagnosis and fixing. For further advice on this issue and help through the process in real time, don't hesitate to consult one of our online mechanics.

16: Clogged Air Filter

clogged air filter in car

The air filter is in charge of stopping dirt and other contaminants and other pollutants from entering your engine. When clogged, it can restrict the flow of air to the motor, which may result in problems starting or perhaps poor performance. Signs of a clogged filter include reduced acceleration, difficulty starting your engine, or even reduced fuel efficiency. To fix this concern, it is necessary to change the filter – something effortlessly done by either an experienced mechanic or alternatively someone who enjoys DIY and understands what they're doing.

17: Dirty Fuel Injectors

Dirty Fuel Injectors

Fuel injectors are accountable for delivering gas to the engine. If they become unclean or even clogged, it might impede sufficient fuel delivery to begin or even operate the engine accurately. Symptoms that the injectors may be clogged consist of a lack of response when turning on the ignition key, poor acceleration, or perhaps engine stalling. The solution for clogged injectors involves cleaning, which could be performed by a skilled mechanic.

18: Faulty Engine Control Module (ECM)

Car mechanic team using laptop boosting car engine at auto repair shop

The engine control module (ECM) is responsible for monitoring and controlling many Chrysler systems, including the performance of the engine as well as emissions. If this ECM fails or malfunctions, it may lead to various issues with starting or even the running of the engine. Indications that there is an issue with the ECM include alert lights on the dashboard, poor acceleration, or trouble starting the engine. To fix the matter with a malfunctioning ECM, speak to a skilled mechanic that is able to correctly identify as well as repair it.

19: Bad Fuel Pump Relay

bad fuel pump relay

The pump relay is responsible for sending power to the fuel pump, thus in case the relay malfunctions, the pump will not get enough current to operate which may result in engine starting issues. Indications that there's something wrong include a lack of response while turning the key in the ignition, engine stalling, or engine misfires. To resolve a faulty fuel pump relay, an expert or even knowledgeable do-it-yourselfer can replace the relay with proper instructions or advice.

20: Failed Throttle Position Sensor

Faulty throttle position sensor

The throttle position sensor is responsible for observing the throttle position as well as transmitting such information to the control module. If it fails, your Chrysler may not begin or even operate smoothly. Signs of a broken throttle position sensor consist of no response as you turn your key into the ignition, weak speeding up, or even engine stalling. Fixing a malfunctioning position sensor necessitates expert diagnosis as well as repair by way of a skilled Chrysler mechanic.


In conclusion, when your car won't fire up, it can be a frustrating as well as stressful situation. Yet, you will find several possible factors and solutions regarding why this particular might occur. By means of comprehending the usual reasons and signs linked to a not starting vehicle, you can precisely diagnose the problem and find a highly effective fix. Irrespective of the cause of the vehicle failing to start, whether it's a drained battery, fuel issue, bad starter, or even ignition system problem – there are actions you are able to take to obtain back on track securely. At all times use care while focusing on the car and don't hesitate to find professional help if required. We trust this comprehensive guide provides enough details so you can rapidly identify what exactly is hindering its engine from starting once more in order that the problem could be resolved immediately. Don't forget, if you need extra help or advice, feel free to use our talk to a mechanic online service!

when to ask a mechanic


FAQs (Frequently Asked Questions)

What steps should I take if my Chrysler doesn't start?

If your vehicle won't start, initially check the car battery, fuel system, starter motor, and ignition for issues. If you can't get your Chrysler to a local mechanic, you could talk to one online initially.

How can I tell if my Chrysler battery is dead?

Indications of a dead Chrysler battery consist of problems starting the engine or hearing clicking as you turn on the ignition switch. If you are not sure, speak to an online or local mechanic.

How can I tell if my Chrysler fuel filter is blocked?

Signs that your filter may be clogged include lack of power, stalling or trouble starting the engine. If you're uncertain, consult an online or local mechanic.

What is the recommended frequency for Chrysler battery replacement?

The lifespan of a car battery varies, however generally speaking, it is recommended to change car batteries every three to five years in order to prevent problems with starting your vehicle.

Can a bad mass airflow sensor keep my Chrysler from starting?

Although a malfunctioning mass airflow sensor may impact performance, it is unlikely to lead to issues with starting your vehicle.

What is the process to jump start a Chrysler?

In order to jump start your Chrysler, you will need jumper cables and another vehicle with a functioning battery. Connect the jumper cables correctly following the correct order, turn on the functioning vehicle, wait a few minutes, and then restart your car. Consult with an online mechanic to guide you through this process.

Will a faulty alternator prevent my Chrysler from starting?

Yes, it can. If the alternator is faulty, the battery might not have enough charge to start the engine. Consult with a local or online mechanic for advice regarding this matter.

What are the signs of bad spark plugs in a Chrysler?

Indications of bad spark plugs consist of rough engine idle, reduced acceleration, or trouble starting your Chrysler.

What should I do If my Chrysler stalls while driving?

In the event, your Chrysler stalls while driving, the first attempt to carefully pull over to a safe spot on the roadside, switch off the engine and try restarting it. If this doesn't work, seek the help of a professional for help.

Will a damaged timing belt harm my Chrysler engine?

Indeed, such damage might be expensive to fix should the timing belt break. If you are unsure, consult a local or online mechanic.

Chat With a Mechanic?

24/7 Expert Mechanics To Help Solve Any Issues Your Having.


Chat With a Mechanic?

24/7 Expert Mechanics To Help Solve Any Issues Your Having.